UV Lamp Fading Tester ASTM D1148 Yellow Resistance Aging Oven PID Controlling
Use: this yellow resistance aging test chamber is manufactured in accordance with ASTM D1148, the function is to simulate the ultraviolet radiation and heat of sunlight environmental. After the sample is exposed to ultraviolet rays and temperature in the machine, after a period of time, observe the degree of resistance to yellowing of the sample; use the stained gray mark as a reference to determine its yellowing grade. The machine has complete accessories and can also be used as an aging test box or drying oven.
UV Lamp Fading Oven Features:
1.German original imported sun bulbs (Osram)
2.Thick insulation layer
3.mported control device
Follow Standards: ISO8580, ASTM D1148,GB/T18830
Technical Specifications :
| Inner Chamber | 50cm×50cm×60cm (W×D×H) |
| Temperature Range | Room temperature+5℃ ~ 200℃ |
| Temperature Controller | P.I.D. Automatic Calculation |
| Temperature Resolution | 0.1℃ |
| Control Accuracy | ±0.3 ℃ |
| Distribution Accuracy | ±1 % (1℃) at-room 100℃ |
| Timer | 0 ~ 999 Hours/Minutes, Electronic display, Power failure memory type, Buzzer |
| Compartment tray | Dia. 45cm, 3 R.P.M, Height-adjustable |
| UV light source | Light bulb, UV/300W |
| Standard Accessories | Shelves x 2 |
| Heating Mode | Heated air circulation |
| Safety Protection | Independent EGO over-temperature power failure, safety overload switch |
| Oven Body Material | Outside is paint coating, inside is SUS#304 stainless steel |
| Power | 1PH, AC220V, 15A |
Operation Procedures:
1. Take samples of size no limitation, and sample is placed inside of the compartment tray.
2. The sample is placed on a compartment tray, distributed in a ring-like and radiation-like arranged.
3. Adjust the height so that the tray surface and the bulbs specimen surface distance of about 15cm or other specified distance.
4. Turn on the main power switch.
5. Set the compartment tray revolutions.
6. Setting the temperature.
7. Turn on the UV lamp switch.
8. Open one exhaust port of machine top, the inlet port of machine bottom left and the fan air intake of machine right, heat generated by the lamp in order to facilitate the smooth discharge.
Yellow Resistance Test Chamber Pictures:
Chamber Inside (could place turntable or shelves):
Controller :
Product Tags:
|
|
UV Lamp Fading Tester ASTM D1148 Yellow Resistance Aging Oven Images
|
